ESY Residential Hybrid Inverters

Inverters with firmware version older than the following have a minimum SoC level of 35%. Starting from this version, this setting can be configured by the user.

Minimum required version: MCU version 1040, DSP version 1042.

• You MUST give each device a unique address on the RS485 bus. Check the device manual for instructions.
• Use lower addresses first (1, 2, ...) because the EPSherpa EMS will find them faster!
• For each device, it is generally recommended to keep the factory-default baud rate, parity, and stop bits. The EPSherpa EMS will scan those first.